Boilers & Plumbing in Roundhay
Roundhay's trusted plumber
Roundhay is one of the few parts of Leeds where the heating job is defined less by age and more by scale. The substantial Edwardian and Victorian detached properties off Street Lane, Princes Avenue, and Wetherby Road were built for large households and they have the pipe runs to match - multiple floors, high ceilings, sprawling layouts, and heating systems that a standard combi simply cannot serve well.
Many of the larger homes in LS8 were originally served by multi-zone gravity-fed systems with separate hot water and central heating circuits. Updating these to modern sealed or unvented systems is a common project for us. It is not a simple swap - the pipe layout often needs rerouting and the existing radiators may need replacing or supplementing to match the output of a modern boiler.
Properties on Oakwood Lane and around the Lidgett Park area often have original single-pipe heating circuits, where radiators are connected in series. These are inefficient and difficult to balance properly. We convert them to conventional two-pipe systems as part of a wider central heating upgrade, which typically results in far more even heat across a large property.
The most common call we get from new LS8 homeowners is that the combi boiler installed by a previous owner cannot keep up with hot water demand across multiple bathrooms. For a property of this type, a system boiler paired with a 210 or 300 litre unvented cylinder is almost always the right answer. Mains-pressure hot water to every outlet simultaneously, no pressure drop when two showers run at once.
Serving
Roundhay
Services in Roundhay
Local highlights
- →Multi-zone heating upgrades in large Edwardian and Victorian detached homes
- →Conversion from gravity-fed to sealed or unvented systems
- →Unvented cylinder installation for mains-pressure hot water to multiple bathrooms
- →High-output system boiler replacement in large LS8 properties
Contact
Quick facts
- Postcodes covered:LS8
- ✓No call-out charge
- ✓Gas Safe registered
- ✓Available 24 hours
Common questions about boilers & plumbing in Roundhay
Our Roundhay house has eight bedrooms and the current combi boiler cannot keep up with hot water demand. What do you recommend?+−
A combi is rarely the right choice for a large property with multiple bathrooms. We would normally recommend a high-efficiency system boiler paired with a pressurised unvented hot water cylinder - typically 210 or 300 litres for a property of that size. This gives mains-pressure hot water to every outlet simultaneously. We can survey the house and give you a fixed quote.
We have a single-pipe heating system and some radiators barely get warm. Can it be fixed?+−
Single-pipe systems are difficult to balance correctly because each radiator receives water that has already given up heat to the previous one. The most effective solution is conversion to a two-pipe system. We carry this out regularly in large LS8 properties and the difference in comfort and efficiency is significant.
Our Edwardian house has a cellar boiler room with an old floor-standing boiler. Can you replace it with a modern unit in the same location?+−
Yes. A modern high-efficiency wall-hung boiler can be fitted in a cellar or boiler room without issue. We would run a new flue to the outside, upgrade the pipework connections, and decommission the old floor-standing unit. Frees up useful floor space and the new boiler will meet current efficiency requirements.
Also covering nearby:
All areas carry no call-out charge.
Speak to John today
Call now for a free, no-obligation quote. No call-out charge. Gas Safe registered. Over 35 years experience.